Accuracy at low oxygen level.
METTLER TOLEDO’s InPro6900i is the intelligent counterpart for the InPro6900, the proven standard especially in food and beverage applications for low oxygen concentrations. The special electrode design with guard ring around the cathode together with the larger surface of the cathode allows for measurement down to 1ppb dissolved oxygen.
Thanks to the integratedISM technologywith Plug and Measure capability makes installation much easier and offers new possibilities for maintenance planning thanks automated self diagnosis and asset management. Together with theiSense Asset Suitealways one step ahead. |
As with all oxygen sensors from METTLER TOLEDO also the ISM sensors fulfill highest requirements for hygienic design in compliance with EHEDG and 3-A standards. The proven maintenance concept with membrane body and replaceable inner body is continued with all i-type sensors.
Features and Benefits
Enhanced diagnostics |
|
Predictive maintenance |
|
High process safety |
|
Reduced service time down to just 5 minutes |
|
Long sensor lifetime |
|
Installation in hazardous zones |
|
规格 - InPro6900i Sensor for dissolved oxygen in ppb level
简短描述 | Sterile/hygieic process for low oxygen level |
精度 | 1 % or 1 ppb |
检测限 | 1 ppb |
可蒸汽消毒 | yes |
可高温高压消毒 | no |
液接材质 | stainless steel (AISI316L) with 3.1B certificates |
机械耐压 | max. 12 bar (174 psi) absolute |
ISM智能传感器管理 | yes |
ATEX 防爆认证 | II 1/2GD Ex ia IIC T6/T5/T4/T3, IP6X T 69 °C / T 81 °C / T 109 °C / T 161 °C, SNCH 01 ATEX 3277X |
FM 防爆认证 | IS / I, II, III /1/ ABCDEFG / T6 Ta=60 °C - 53 800 002; Entity |
接头 | VP |
Insertion length | for 12 mm: 70, 120, 220 mm (2.8", 4.7", 8.7") |