Thermo酶标仪Multiskan FC技术参数:
1、光源:石英卤素灯
2、波长范围:340-850nm
3、滤光片:8位滤光片,标配3块滤光片:405nm,450nm和620nm,其它滤光片可选
4、滤光片半带宽:3-9nm
5、读数范围:0-6Abs
6、线性范围(405nm):0-3Abs,96孔板,快速测量模式
0-4Abs,96孔板,标准测量模式
7、分辨率:0.001Abs
8、准确性(405nm):±1%(0-3Abs),±2%(3-4Abs)
9、精确性(405nm):CV≤0.2%(0-3Abs),标准测量模式
10、测量速度:6s,96孔板,快速测量模式;12s,96孔板,标准测量模式
11s,384孔板,快速测量模式;33s,384孔板,标准测量模式
11、孵育器(选配):温控范围:室温+4℃至50℃
12、振荡器:线性震荡,三档速度可选
13、机械臂兼容:可以
14、按键和显示:高分辨彩色显示屏,分辨率为480272像素
15、用户界面:内置软件和Skanllt软件(通过电脑控制)
16、内存:仪器内可存储100个测量程序和100组测量结果(96孔板)
17、外接打印机类型:HP PCL5
18、通讯接口:USB用于计算机连接
USB外接U盘用于结果的输出和保存
USB外接打印机接口
19、电源:100-240V(50/60Hz)
20、功率:100W,待机8W
21、外部尺寸:210mm(H)X290mm(W)X400mm(D)
22、重量:8.5kg
Thermo酶标仪Multiskan FC(不带孵育器)配置单
1.酶标仪主机一台
2.滤光片三个:405nm,450nm,620nm
3.酶标板一套
4.电源线一根
5.计算机连接线一根
6.随机软件(中文)一套
7.英文说明书一本
8.中文简易操作说明一本
Thermo酶标仪Multiskan FC
Thermo酶标仪Multiskan FC
This chapter describes the installation setups of the Multiskan FC
instrument.
Warning The Multiskan FC weighs 8.5 kg [18.7 lbs.] and care must be
taken when lifting it. ▲
This section covers the relevant procedures to be carried out upon
arrival of the instrument.
Move the packed instrument to its site of operation. To prevent
condensation, the instrument should be left in its protective plastic
wrapping until the ambient temperature has been reached. Unpack the
Multiskan FC instrument and accessories carefully with the arrows on
the transport package pointing upwards. Place the instrument o
nto a
laboratory bench.
Caution Do not touch or loosen any screws or parts other than those
specifically designated in the instructions. Doing so may cause
misalignment and will void the instrument warranty. ▲
Retain the original packaging for future transportation. The packaging
is designed to assure safe transport and minimize transit damage. Use of
alternative packaging materials may invalidate the warranty. Also retain
all instrument-related docu
mentation provided by the manufacturer for
future use.
If you relocate your instrument or ship it for service, refer to “How to
pack for service” on page 105.
Check the enclosed packing list against order. Visually inspect the
transport package, the instrument and the accessories for any possible
transport damage. If any parts are missing or damaged, co
ntact your
local Thermo Fisher Scientific representative or Thermo Fisher
Scientific Oy.