AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Final rule.

SUMMARY:

This regulation establishes an exemption from the requirement of a tolerance for residues of formaldehyde, reaction products with melamine; 1,3,5-triazine-2,4,6-triamine, polymer with formaldehyde; formaldehyde reaction products with melamine and methanol; and 1,3,5-triazine-2,4,6-triamine, polymer with formaldehyde, methylated; collectively referred to as melamine formaldehyde polycondensate resin; when used as an inert ingredient in a pesticide chemical formulation. BASF Corporation submitted a petition to EPA under the Federal Food, Drug, and Cosmetic Act (FFDCA), requesting an exemption from the requirement of a tolerance. This regulation eliminates the need to establish a maximum permissible level for residues of formaldehyde, reaction products with melamine; 1,3,5-triazine-2,4,6-triamine, polymer with formaldehyde; formaldehyde reaction products with melamine and methanol; 1,3,5-triazine-2,4,6-triamine, polymer with formaldehyde, methylated on food or feed commodities.

DATES:

This regulation is effective June 20, 2019. Objections and requests for hearings must be received on or before August 19, 2019, and must be filed in accordance with the instructions provided in40 CFR part 178(see also Unit I.C. of theSUPPLEMENTARY INFORMATION).

ADDRESSES:

The docket for this action, identified by docket identification (ID) number EPA-HQ-OPP-2018-0845, is available athttp://www.regulations.govStart Printed Page 28748or at the Office of Pesticide Programs Regulatory Public Docket (OPP Docket) in the Environmental Protection Agency Docket Center (EPA/DC), West William Jefferson Clinton Bldg., Rm. 3334, 1301 Constitution Ave. NW, Washington, DC 20460-0001. The Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Public Reading Room is (202) 566-1744, and the telephone number for the OPP Docket is (703) 305-5805. Please review the visitor instructions and additional information about the docket available athttp://www.epa.gov/?dockets.

FOR FURTHER INFORMATION CONTACT:

Michael Goodis, Registration Division (7505P), Office of Pesticide Programs, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001; main telephone number: (703) 305-7090; email address:RDFRNotices@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this action apply to me?

You may be potentially affected by this action if you are an agricultural producer, food manufacturer, or pesticide manufacturer. The following list of North American Industrial Classification System (NAICS) codes is not intended to be exhaustive, but rather provides a guide to help readers determine whether this document applies to them. Potentially affected entities may include:

• Crop production (NAICS code 111).
• Animal production (NAICS code 112).
• Food manufacturing (NAICS code 311).
• Pesticide manufacturing (NAICS code 32532).

B. How can I get electronic access to other related information?

You may access a frequently updated electronic version of40 CFR part 180through the Government Publishing Office's e-CFR site athttp://www.ecfr.gov/?cgi-bin/?text-idx??&?c=?ecfr&?tpl=?/?ecfrbrowse/?Title40/?40tab_?02.tpl.

C. Can I file an objection or hearing request?

Under FFDCA section 408(g),21 U.S.C. 346a, any person may file an objection to any aspect of this regulation and may also request a hearing on those objections. You must file your objection or request a hearing on this regulation in accordance with the instructions provided in40 CFR part 178. To ensure proper receipt by EPA, you must identify docket ID number EPA-HQ-OPP-2018-0845 in the subject line on the first page of your submission. All objections and requests for a hearing must be in writing, and must be received by the Hearing Clerk on or before August 19, 2019. Addresses for mail and hand delivery of objections and hearing requests are provided in40 CFR 178.25(b).

In addition to filing an objection or hearing request with the Hearing Clerk as described in40 CFR part 178, please submit a copy of the filing (excluding any Confidential Business Information (CBI)) for inclusion in the public docket. Information not marked confidential pursuant to40 CFR part 2may be disclosed publicly by EPA without prior notice. Submit the non-CBI copy of your objection or hearing request, identified by docket ID number EPA-HQ-OPP-2018-0845, by one of the following methods.

• Federal eRulemaking Portal:http://www.regulations.gov.Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be CBI or other information whose disclosure is restricted by statute.
• Mail:OPP Docket, Environmental Protection Agency Docket Center (EPA/DC), (28221T), 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001.
• Hand Delivery:To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions athttp://www.epa.gov/?dockets/?contacts.html.Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available athttp://www.epa.gov/?dockets.

II. Background and Statutory Findings

In theFederal Registerof March 18, 2019 (84 FR 9735) (FRL-9989-90), EPA issued a document pursuant to FFDCA section 408,21 U.S.C. 346a, announcing the receipt of a pesticide petition (PP IN-11260) filed by BASF Corporation, 26 Davis Drive, Research Triangle Park, NC 27709. The petition requested that40 CFR 180.960be amended by establishing an exemption from the requirement of a tolerance for residues of formaldehyde, reaction products with melamine (CAS Reg. No. 94645-56-4); 1,3,5-triazine-2,4,6-triamine, polymer with formaldehyde (CAS Reg. No. 9003-08-1); formaldehyde reaction products with melamine and methanol (CAS Reg. No. 94645-53-1); 1,3,5-triazine-2,4,6-triamine, polymer with formaldehyde, methylated (CAS Reg. No. 68002-20-0). That document included a summary of the petition prepared by the petitioner and solicited comments on the petitioner's request. One comment was received on the notice of filing. EPA's response to these comments is discussed in Unit VIII.B.

Section 408(c)(2)(A)(i) of FFDCA allows EPA to establish an exemption from the requirement for a tolerance (the legal limit for a pesticide chemical residue in or on a food) only if EPA determines that the exemption is ��safe.�� Section 408(c)(2)(A)(ii) of FFDCA defines ��safe�� to mean that ��there is a reasonable certainty that no harm will result from aggregate exposure to the pesticide chemical residue, including all anticipated dietary exposures and all other exposures for which there is reliable information.�� This includes exposure through drinking water and use in residential settings, but does not include occupational exposure. Section 408(b)(2)(C) of FFDCA requires EPA to give special consideration to exposure of infants and children to the pesticide chemical residue in establishing an exemption from the requirement of a tolerance and to ��ensure that there is a reasonable certainty that no harm will result to infants and children from aggregate exposure to the pesticide chemical residue . . .�� and specifies factors EPA is to consider in establishing an exemption.

III. Risk Assessment and Statutory Findings

EPA establishes exemptions from the requirement of a tolerance only in those cases where it can be shown that the risks from aggregate exposure to pesticide chemical residues under reasonably foreseeable circumstances will pose no appreciable risks to human health. In order to determine the risks from aggregate exposure to pesticide inert ingredients, the Agency considers the toxicity of the inert in conjunction with possible exposure to residues of the inert ingredient through food, drinking water, and through other exposures that occur as a result of pesticide use in residential settings. If EPA is able to determine that a finite tolerance is not necessary to ensure that there is a reasonable certainty that no harm will result from aggregate exposure to the inert ingredient, an exemption from the requirement of a tolerance may be established.

Consistent with FFDCA section 408(b)(2)(D), EPA has reviewed the available scientific data and other relevant information in support of this action and considered its validity, completeness and reliability and the relationship of this information to human risk. EPA has also considered available information concerning theStart Printed Page 28749variability of the sensitivities of major identifiable subgroups of consumers, including infants and children. In the case of certain chemical substances that are defined as polymers, the Agency has established a set of criteria to identify categories of polymers expected to present minimal or no risk. The definition of a polymer is given in40 CFR 723.250(b) and the exclusion criteria for identifying these low-risk polymers are described in40 CFR 723.250(d). Melamine formaldehyde polycondensate resin conforms to the definition of a polymer given in40 CFR 723.250(b) and meets the following criteria that are used to identify low-risk polymers.

1. The polymer is not a cationic polymer nor is it reasonably anticipated to become a cationic polymer in a natural aquatic environment.

2. The polymer does contain as an integral part of its composition at least two of the atomic elements carbon, hydrogen, nitrogen, oxygen, silicon, and sulfur.

3. The polymer does not contain as an integral part of its composition, except as impurities, any element other than those listed in40 CFR 723.250(d)(2)(ii).

4. The polymer is neither designed nor can it be reasonably anticipated to substantially degrade, decompose, or depolymerize.

5. The polymer is manufactured or imported from monomers and/or reactants that are already included on the TSCA Chemical Substance Inventory or manufactured under an applicable TSCA section 5 exemption.

6. The polymer is not a water absorbing polymer with a number average molecular weight (MW) greater than or equal to 10,000 daltons.

7. The polymer does not contain certain perfluoroalkyl moieties consisting of a CF3- or longer chain length as listed in40 CFR 723.250(d)(6).

Additionally, the polymer also meets as required the following exemption criteria specified in40 CFR 723.250(e).

8. The polymer's number average MW of 10,000 is greater than or equal to 10,000 daltons. The polymer contains less than 2% oligomeric material below MW 500 and less than 5% oligomeric material below MW 1,000.

Thus, melamine formaldehyde polycondensate resin meet the criteria for a polymer to be considered low risk under40 CFR 723.250. based on its conformance to the criteria in this unit, no mammalian toxicity is anticipated from dietary, inhalation, or dermal exposure to melamine formaldehyde polycondensate resin.

IV. Aggregate Exposures

For the purposes of assessing potential exposure under this exemption, EPA considered that melamine formaldehyde polycondensate resin could be present in all raw and processed agricultural commodities and drinking water, and that non-occupational non-dietary exposure was possible. The number average MW of melamine formaldehyde polycondensate resin is 10,000 daltons. Generally, a polymer of this size would be poorly absorbed through the intact gastrointestinal tract or through intact human skin. Since melamine formaldehyde polycondensate resin conform to the criteria that identify a low-risk polymer, there are no concerns for risks associated with any potential exposure scenarios that are reasonably foreseeable. The Agency has determined that a tolerance is not necessary to protect the public health.

V. Cumulative Effects From Substances With a Common Mechanism of Toxicity

Section 408(b)(2)(D)(v) of FFDCA requires that, when considering whether to establish, modify, or revoke a tolerance, the Agency consider ��available information�� concerning the cumulative effects of a particular pesticide's residues and ��other substances that have a common mechanism of toxicity.��

EPA has not found melamine formaldehyde polycondensate resin to share a common mechanism of toxicity with any other substances, and melamine formaldehyde polycondensate resin does not appear to produce a toxic metabolite produced by other substances. For the purposes of this tolerance action, therefore, EPA has assumed that melamine formaldehyde polycondensate resin does not have a common mechanism of toxicity with other substances. For information regarding EPA's efforts to determine which chemicals have a common mechanism of toxicity and to evaluate the cumulative effects of such chemicals, see EPA's website athttp://www.epa.gov/?pesticides/?cumulative.

VI. Additional Safety Factor for the Protection of Infants and Children

Section 408(b)(2)(C) of FFDCA provides that EPA shall apply an additional tenfold margin of safety for infants and children in the case of threshold effects to account for prenatal and postnatal toxicity and the completeness of the data base unless EPA concludes that a different margin of safety will be safe for infants and children. Due to the expected low toxicity of melamine formaldehyde polycondensate resin, EPA has not used a safety factor analysis to assess the risk. For the same reasons the additional tenfold safety factor is unnecessary.

VII. Determination of Safety

based on the conformance to the criteria used to identify a low-risk polymer, EPA concludes that there is a reasonable certainty of no harm to the U.S. population, including infants and children, from aggregate exposure to residues of melamine formaldehyde polycondensate resin.

VIII. Other Considerations

A. Analytical Enforcement Methodology

An analytical method is not required for enforcement purposes since the Agency is establishing an exemption from the requirement of a tolerance without any numerical limitation.

B. Response to Comments

One comment was received in response to the Notice of Filing, generally stating that exposure to pesticides needs to be decreased. The Agency recognizes that some individuals believe that pesticides should be limited or banned on agricultural crops. However, the existing legal framework provided by section 408 of the Federal Food, Drug and Cosmetic Act (FFDCA) states that tolerances may be set when persons seeking such tolerances or exemptions have demonstrated that the pesticide meets the safety standard imposed by that statute. This citizen's comment appears to be directed at the underlying statute and not EPA's implementation of it; the citizen has provided no information that would support a conclusion that these exemptions are not safe.

IX. Conclusion

Accordingly, EPA finds that exempting residues of melamine formaldehyde polycondensate resin from the requirement of a tolerance will be safe.

X. Statutory and Executive Order Reviews

This action establishes a tolerance under FFDCA section 408(d) in response to a petition submitted to the Agency. The Office of Management and Budget (OMB) has exempted these types of actions from review under Executive Order 12866, entitled ��Regulatory Planning and Review�� (58 FR 51735, October 4, 1993). Because this action has been exempted from review under Executive Order 12866, this action is not subject toExecutive Order 13211,Start Printed Page 28750entitled ��Actions Concerning Regulations That Significantly Affect Energy Supply, Distribution, or Use�� (66 FR 28355, May 22, 2001) orExecutive Order 13045,entitled ��Protection of Children from Environmental Health Risks and Safety Risks�� (62 FR 19885, April 23, 1997). This action does not contain any information collections subject to OMB approval under the Paperwork Reduction Act (PRA) (44 U.S.C. 3501et seq.), nor does it require any special considerations underExecutive Order 12898,entitled ��Federal Actions to Address Environmental Justice in Minority Populations and Low-Income Populations�� (59 FR 7629, February 16, 1994).

Since tolerances and exemptions that are established on the basis of a petition under FFDCA section 408(d), such as the tolerance in this final rule, do not require the issuance of a proposed rule, the requirements of the Regulatory Flexibility Act (RFA) (5 U.S.C. 601et seq.), do not apply.

This action directly regulates growers, food processors, food handlers, and food retailers, not States or tribes, nor does this action alter the relationships or distribution of power and responsibilities established by Congress in the preemption provisions of FFDCA section 408(n)(4). As such, the Agency has determined that this action will not have a substantial direct effect on States or tribal governments, on the relationship between the national government and the States or tribal governments, or on the distribution of power and responsibilities among the various levels of government or between the Federal Government and Indian tribes. Thus, the Agency has determined thatExecutive Order 13132,entitled ��Federalism�� (64 FR 43255, August 10, 1999) andExecutive Order 13175,entitled ��Consultation and Coordination with Indian Tribal Governments�� (65 FR 67249, November 9, 2000) do not apply to this action. In addition, this action does not impose any enforceable duty or contain any unfunded mandate as described under Title II of the Unfunded Mandates Reform Act (UMRA) (2 U.S.C. 1501et seq.).

This action does not involve any technical standards that would require Agency consideration of voluntary consensus standards pursuant to section 12(d) of the National Technology Transfer and Advancement Act (NTTAA) (15 U.S.C. 272note).

XI. Congressional Review Act

Pursuant to the Congressional Review Act (5 U.S.C. 801et seq.), EPA will submit a report containing this rule and other required information to the U.S. Senate, the U.S. House of Representatives, and the Comptroller General of the United States prior to publication of the rule in theFederal Register. This action is not a ��major rule�� as defined by5 U.S.C. 804(2).

List of Subjects in40 CFR Part 180

• Environmental protection
• Administrative practice and procedure
• Agricultural commodities
• Pesticides and pests
• Reporting and recordkeeping requirements

Therefore, 40 CFR chapter I is amended as follows:

PART 180��[AMENDED]

1. The authority citation for part 180 continues to read as follows:

Authority:21 U.S.C. 321(q), 346a and 371.

2. In ��?180.960, add alphabetically the polymers ��Formaldehyde, reaction products with melamine, minimum number average molecular weight (in amu), 10000��; ��Formaldehyde, reaction products with melamine and methanol, minimum number average molecular weight (in amu), 10000��; ��1,3,5-triazine-2,4,6-triamine, polymer with formaldehyde, minimum number average molecular weight (in amu), 10000��; and ��1,3,5-triazine-2,4,6-triamine, polymer with formaldehyde, methylated, minimum number average molecular weight (in amu), 10000�� to the table to read as follows: