Odorless light petroleum hydrocarbons may be safely used, as a component of nonfood articles intended for use in contact with food, in accordance with the following prescribed conditions:
(a The additive is a mixture of liquid hydrocarbons derived from petroleum or synthesized from petroleum gases. The additive is chiefly paraffinic, isoparaffinic, or naphthenic in nature.
(b The additive meets the following specifications:
? Odor is faint and not kerosenic.
? Initial boiling point is 300 F minimum.
? Final boiling point is 650 F maximum.
? Ultraviolet absorbance limits determined by method specified in 178.3620(b)(1)(ii? as follows:
Wavelength (M?) | Maximum absorb-ance per centimeter optical pathlength |
280 to 289 | 4.0 |
290 to 299 | 3.3 |
300 to 329 | 2.3 |
330 to 360 | .8 |
(c The additive is used as follows:
Use | Limitations |
As a plasticizer and absorber oil in the manufacture of polyolefin articles authorized for food contact use | In an amount not to exceed that required to produce intended effect, consistent with good manufacturing practice. |
As a lubricant of fibers of textiles authorized for food contact use | At a use level not to exceed 0.15 percent by weight of finished fibers. |
As a component of adhesives | Complying with175.105of this chapter. |
As a defoamer in the manufacture of paper and paperboard | Complying with176.210of this chapter. |
As a defoamer in coatings | Complying with176.200of this chapter. |