当前位置: 首页? 政策法规? 国外法规? §177.2400 全氟化碳固化弹性材?Perfluorocarbon cured elastomers)

§177.2400 全氟化碳固化弹性材?Perfluorocarbon cured elastomers)

扫描二维 分享好友和朋友圈
放大字体缩小字体2011-10-13 02:49:05 来源9a href="http://www.law.cornell.edu/cfr/text/21/177/2400" target="_blank" rel="nofollow">GPO浏览次数9span id="hits">3298
核心提示:全氟化碳固化弹性材料由四氟乙烯、全氟甲基乙烯基醚和全氟-2-苯氧丙基乙烯基醚三聚而成,该三聚物用交联剂苯酚和4,4'-[2,2,2-三氟-1-(三氟甲基)亚乙基]双二钾盐和促进剂1,4,7,10,13,16-六氧杂环十八烷固化。全氟化碳固化弹性材料可含有下列辅料:一般公认为用在食品或食品包装中式安全的物质,在已公布的法规和规定文件中允许使用的物质。在本章175?78部分和本章中允许使用的物质。本节还规定了全氟化碳固化弹性材料的质量指标和浸提物限量、/div>
发布单位
FDA
FDA
发布文号 49 FR 43050
发布日期 1984-10-24 生效日期 暂无
有效性状?/th> 废止日期 暂无
备注 全氟化碳固化弹性材料由四氟乙烯、全氟甲基乙烯基醚和全氟-2-苯氧丙基乙烯基醚三聚而成,该三聚物用交联剂苯酚和4,4'-[2,2,2-三氟-1-(三氟甲基)亚乙基]双二钾盐和促进剂1,4,7,10,13,16-六氧杂环十八烷固化。全氟化碳固化弹性材料可含有下列辅料:一般公认为用在食品或食品包装中式安全的物质,在已公布的法规和规定文件中允许使用的物质。在本章175?78部分和本章中允许使用的物质。本节还规定了全氟化碳固化弹性材料的质量指标和浸提物限量、/td>

   177.2400 Perfluorocarbon cured elastomers.

   Perfluorocarbon cured elastomers identified in paragraph (a of this section may be safely used as articles or components of articles intended for repeated use in contact with nonacid food (pH above 5.0? subject to the provisions of this section.

  (a Identity. ? For the purpose of this section, perfluorocarbon cured elastomers are produced by terpolymerizing tetrafluorethylene (CAS Reg. No. 116-14-3? perfluoromethyl vinyl ether (CAS Reg. No. 1187-93-5? and perfluoro-2-phenoxypropyl vinyl ether (CAS Reg. No. 24520-19-2 and subsequent curing of the terpolymer (CAS Reg. No. 26658-70-8 using the cross linking agent, phenol, 4,4-[2,2,2-trifluoro-1-(trifluoromethyl ethylidene] bis-,dipotassium salt (CAS Reg. No. 25088-69-1 and accelerator, 1,4,7,10,13,16-hexaoxacyclooctadecane (CAS Reg. No. 17455-13-9?

  ? The perfluorocarbon base polymer shall contain no less than 40 weight-percent of polymer units derived from tetrafluoroethylene, no less than 40 weight-percent of polymer units derived from perfluoromethyl vinyl ether and no more than 5 weight-percent polymer units derived from perfluoro-2-phenoxy-propyl vinyl ether.

  ? The composition limitations of the cured elastomer, calculated as parts per 100 parts of terpolymer, are as follows:

  Phenol, 4,4-[2,2,2-trifluoro-1-(trifluoromethyl?ethylidene] bis-,dipotassium saltnot to exceed 5 parts.

  1,4,7,10,13,16-Hexaoxacyclo-octadecanenot to exceed 5 parts.

  (b Optional adjuvant substances. The perfluorocarbon cured elastomer identified in paragraph (a of this section may contain the following optional adjuvant substances, subject to any limitations cited on their use:

  ? Substances generally recognized as safe (GRAS in food or food packaging.

  ? Substances used in accordance with a prior sanction.

  ? Substances authorized under applicable regulations in this part and in parts 175 and 178 of this chapter and subject to any limitations prescribed therein.

  ? Substances identified in this paragraph (b)(4 subject to such limitations as are provided:

Substances Limitations
Carbon black (channel process of furnace combustion process) (CAS Reg. No. 1333-86-4) Not to exceed 15 parts per 100 parts of the terpolymer.
Magnesium oxide (CAS Reg. No. 1309-48-4) Not to exceed 5 parts per 100 parts of the terpolymer.

  (c Specifications ? Infrared identification. Perfluorocarbon cured elastomers may be identified by the characteristic infrared spectra of the pyrolysate breakdown product that is obtained by heating and decomposing the elastomer using the method entitled Qualitative Identification of Kalrez ? by Infrared Examination of Pyrolysate. This method is incorporated by reference. Copies of the method are available from the Center for Food Safety and Applied Nutrition (HFS-200? Food and Drug Administration, 5100 Paint Branch Pkwy., College Park, MD 20740, or available for inspection at the National Archives and Records Administration (NARA? For information on the availability of this material at NARA, call 202-741-6030, or go to:http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.

  ? Thermogravimetry. Perfluorocarbon cured elastomers have a major decomposition peak occurring at 490 15 C ?14 F? Less than 1.5 percent of the elastomers will volatilize below 400 C ?52 F when run under nitrogen at a 10 C or 18 F per minute heating rate using a Du Pont Thermal Analyzer Model 1099 with Model 951 TGA unit or the equivalent.

  (d Extractive limitations. Articles fabricated from perfluorocarbon cured elastomers having a thickness of at least 1.0 millimeter ?.039 inch when extracted at reflux temperatures for 2 hours separately with distilled water, 50 percent ethanol, and n -heptane, shall meet the following extractability limits:

  ? Total extractives not to exceed 3.1 milligrams per square decimeter ?.2 milligrams per square inch?

  ? Fluoride extractives calculated as fluorine not to exceed 0.47 milligram per square decimeter ?.03 milligram per square inch?

  (e Conditions of use. In accordance with current good manufacturing practice, finished food contact articles containing the perfluorocarbon cured elastomers shall be thoroughly cleaned prior to their first use in contact with food.

    [49 FR 43050, Oct. 26, 1984]

地区9/font>美国
标签9/font>限量食品包装辅料
食品伙伴网提供标准法规解读、舆情监控、合规咨询、申报注册等服务、br/>电询?535-2129301
QQ?891238009
食品标法? border=
实时把握 食品标法动?/span>
请扫码关?span class="color2">食品标法圇/span>

声明9/p>

凡本网所有原?编译文章及图片、图表的版权均属食品伙伴网所有,如要转载,需注明“信息来源:食品伙伴网”、br> 凡本网注明“信息来源:XXX(非食品伙伴网)”的作品,均转载自其他媒体,转载目的在于传递更多的信息,并不代表本网赞同其观点和对其真实性负责、br> 邮箱:law#www.sqrdapp.com(发邮件时请?换成@ QQ?39307733

[ 政策法规搜索] [ 加入收藏] [ 告诉好友] [ 打印本文] [ 关闭窗口]

Baidu
map