§177.1345 Ethylene/1,3-phenylene oxyethylene isophthalate/ terephthalate copolymer.
Ethylene/1, 3-phenylene oxyethylene isophthalate/terephthalate copolymer （CAS Reg. No. 87365-98-8） identified in paragraph （a） of this section may be safely used, subject to the provisions of this section, as the non-food-contact layer of laminate structures subject to the provisions of § 177.1395, and in blends with polyethylene terephthalate polymers complying with § 177.1630.
（a） Identity. For the purpose of this section, ethylene/1,3-phenylene oxyethylene isophthalate/terephthalate copolymer consists of the basic copolymer produced by the catalytic polycondensation of isophthalic acid and terephthalic acid with ethylene glycol and 1,3-bis（2-hydroxyethoxy）benzene such that the finished resin contains between 42 and 48 mole-percent of isophthalic moieties, between 2 and 8 mole-percent of terephthalic moieties, and not more than 10 mole-percent of 1,3-bis（2-hydroxyethoxy）benzene moieties.
（b） Specifications— （1） Density. Ethylene/1,3-phenylene oxyethylene isophthalate/terephthalate copolymer identified in paragraph （a） of this section has a density of 1.33±0.02 grams per cubic centimeter measured by ASTM Method D 1505-85 （Reapproved 1990）, “Standard Test Method for Density of Plastics by the Density-Gradient Technique,” which is incorporated by reference in accordance with 5 U.S.C. 552（a） and 1 CFR part 51. Copies may be obtained from the American Society for Testing and Materials, 100 Barr Harbor Dr., West Conshohocken, Philadelphia, PA 19428-2959, or may be examined at the Center for Food Safety and Applied Nutrition's Library, Food and Drug Administration, 5100 Paint Branch Pkwy., College Park, MD 20740, and at the National Archives and Records Administration （NARA）. For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
（2） Softening point. Ethylene/1,3-phenylene oxyethylene isophthalate/terephthalate copolymer identified in paragraph （a） of this section has a softening point of 63±5 °C as measured by ASTM Method D 1525-87, “Standard Test Method for VICAT Softening Temperature of Plastics,” which is incorporated by reference in accordance with 5 U.S.C. 552（a） and 1 CFR part 51. The availability of this material is provided in paragraph （b）（1） of this section.
（c） Optional adjuvant substances. Ethylene/1,3-phenylene oxyethylene isophthalate/terephthalate copolymer, identified in paragraph （a） of this section, may contain optional adjuvant substances required in their production. The optional adjuvants may include substances used in accordance with § 174.5 of this chapter.
（d） Limitations. Copolymer blends described above shall not exceed 30 percent by weight of ethylene/1, 3-phenylene oxyethylene isophthalate/terephthalate copolymer. The finished blend may be used in contact with food only under conditions of use C through G, as described in table 2 of § 176.170（c） of this chapter, except that with food identified as Type III, IV-A, V, VII-A, and IX in § 176.170（c）, table 1, the copolymer may be used under condition of use C at temperatures not to exceed 160 °F （71 °C）.
[57 FR 43399, Sept. 21, 1992, as amended at 59 FR 62318, Dec. 5, 1994; 61 FR 14481, Apr. 2, 1996; 62 FR 34628, June 27, 1997]