更多关于食品添加剂的法规，请详见美国FDA 21 CFR 第570部分关于食品添加剂的法规汇总。
§ 570.18 Tolerances for related food additives.
（a） Food additives that cause similar or related pharmacological effects will be regarded as a class, and in the absence of evidence to the contrary, as having additive toxic effects and will be considered as related food additives.
（b） Tolerances established for such related food additives may limit the amount of a common component that may be present, or may limit the amount of biological activity （such as cholinesterase inhibition） that may be present or may limit the total amount of related food additives that may be present.
（c） Where food additives from two or more chemicals in the same class are present in or on a food, the tolerance for the total of such additives shall be the same as that for the additive having the lowest numerical tolerance in this class, unless there are available methods that permit quantitative determination of the amount of each food additive present or unless it is shown that a higher tolerance is reasonably required for the combined additives to accomplish the physical or technical effect for which such combined additives are intended and that the higher tolerance will be safe.
（d） Where residues from two or more additives in the same class are present in or on a food and there are available methods that permit quantitative determination of each residue, the quantity of combined residues that are within the tolerance may be determined as follows:
（1） Determine the quantity of each residue present.
（2） Divide the quantity of each residue by the tolerance that would apply if it occurred alone, and multiply by 100 to determine the percentage of the permitted amount of residue present.
（3） Add the percentages so obtained for all residues present.
（4） The sum of the percentages shall not exceed 100 percent.